文獻名: Leaching assessment of aerated concrete made of recycled shale gas drilling cuttings: Particular pollutants, physical performance and environmental characterization
作者: Chao-qiang Wang,De-ming Xiong
摘要:This research aims to study how feasible it is to apply water-based drilling cuttings (WDC), Phosphogypsum (PG) and fly-ash in a coordinated way in aerated concrete, while also adopting non-autoclaved technology which can greatly save energy consumption. So the physiochemical properties, analysis of the microstructure and the environment performance of the WDC were analyzed. In the meantime, the process of hydration of all products of non-autoclaved aerated concrete including WDC were studied by using XRD, FT-IR and SEM. The findings revealed that the benzene series of WDC is all non-detected, and the heavy metals’ results of single factor index method and potential ecological environment risk were all meet the standard. The contents of heavy metals in WDC are under the level of national standard. As well as, the WDC are rich in calcium, silicon and aluminium, and the particle size is concentrated in 30 μm. This chemical and particle characteristic makes them have the basic conditions as mineral admixtures. So, the optimum mixture ratio of aerated concrete is 2.7-13.6% for WDC, 13.6-27.3% for fly-ash, 20% for cement, 11.8% for quicklime and 1.8% for phosphogypsum, and premise condition is W/S is 0.62, curing temperature and time are 80 °C and 12 h, respectively. The unit weight together with the mechanical properties of the aerated concrete that has 40% WDC (instead of 40% fly-ash) all satisfy the B06, A3.5 GB/T11968-2006 standards. Other tests were carried out to determine its environmental performance. It established that the production of aerated concrete with 40% WDC does not result in any secondary contamination. Also, based on these properties of WDC aerated concrete we propose main technology and process route of the industrial practice.
關鍵詞:Drilling cuttings;Utilization;Non-autoclave;Hydration mechanism;Environmental
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。