您好, 歡迎來到化工儀器網
產品分類品牌分類
-
超聲波探傷標準試塊 著色滲透探傷劑/顯像劑/滲透劑/清洗劑 磁粉檢測試塊/磁粉探傷試塊 磁粉探傷耗材 移動式磁粉探傷儀 多用磁粉探傷儀 磁粉磁軛探傷儀/磁探儀 X射線報警儀/個人計量?jī)x 暗室紅燈/三色燈/警告燈 超聲波探傷儀/測厚儀 退磁機/線圈退磁器 冷熱觀片燈/工業評片燈 強度計/特斯拉計/高斯計 數顯黑白密度計/密度片 超聲波探傷耗材 射線探傷耗材 磁粉、磁膏、磁懸液 高強度紫外線燈 熒光探傷燈 紫外線黑光燈/LED黑光燈/熒光探傷燈 工業X光膠片 JB行業標準試塊 GB國家標準試塊 CSK-IA超聲波試塊 焊縫自然缺陷試塊 超聲波檢測試塊 *標準試塊與其他*標準試塊 工業恒溫洗片機、干片機 進口 超聲波耦合劑 其它
DDG-403B（LCD-A） Conductivity MonitorModel
閱讀：2706 發布時間：2013-2-18
Conductivity MonitorModel
DDG-403B（LCD-A）
Operating Instructions
1. IntroductionConductivity monitor DDG-403B （LCD-A） provides advanced measurement and temperature compensation via MCU, with large LCD display. It is widely used in electronics, chemistry, pharmaceutical, mechanical and electrical, nuclear energy and water etc industry. 2. Features1） Automatically reversible measurement range2） Automatically adjustment to zero3） TDS （ppm） display4） Simultaneous viewing of conductivity and temperature values5） Alarm output according to maximum conductivity and TDS value6） Data output via the interface RS-232C7） 220 VAC or 24 VDC powered 3. Technical Specifications1） Measurement range: automatic measurement range at 0-20.00, 200.0, 2000µS/cm, 0-1000ppm can be displayed.2） Temperature compensation: automatic temperature compensation, compensation range 0-60℃, compensation point 25℃, compensation component NTC10KΩ3） Display: 58×42 large LCD screen, 4 digits 0.56’’ for conductivity display, 3 digits 0.36’’ for temperature display4） Accuracy: ≤±2% （F·S）5） Electrode: 1.00cm-1 plastic platinum holder, 4’ pipe-thread, cable length 5m6） Alarm output: available alarm setting for conductivity or TDS. When the measurement reading exceeds the setting value, a relay will be functioned.7） Current Output: DC 4-20mA output, optional according to user’s requirement8） RS-232C interface: available RS-232C access to devices complied with the interface such as computers, printers （DY-301B） to print out measurement data.9） Real time clock: real time clock function supports the continuously changing printing time to be recorded.10） Power supply: 220 VAC or 24 VDC, to be confirmed by customers when replace orders11） Dimensions: frame dimension: 96×96 （mm）, panel dimension: 91×91 （mm）, depth: 95 （mm）12） Testing standard: Q/TCDP03-2000
1. Introduction
Conductivity monitor DDG-403B （LCD-A） provides advanced measurement and temperature compensation via MCU, with large LCD display. It is widely used in electronics, chemistry, pharmaceutical, mechanical and electrical, nuclear energy and water etc industry.
2. Features
1） Automatically reversible measurement range
2） Automatically adjustment to zero
3） TDS （ppm） display
4） Simultaneous viewing of conductivity and temperature values
5） Alarm output according to maximum conductivity and TDS value
6） Data output via the interface RS-232C
7） 220 VAC or 24 VDC powered
3. Technical Specifications
1） Measurement range: automatic measurement range at 0-20.00, 200.0, 2000µS/cm, 0-1000ppm can be displayed.
2） Temperature compensation: automatic temperature compensation, compensation range 0-60℃, compensation point 25℃, compensation component NTC10KΩ
3） Display: 58×42 large LCD screen, 4 digits 0.56’’ for conductivity display, 3 digits 0.36’’ for temperature display
4） Accuracy: ≤±2% （F·S）
5） Electrode: 1.00cm-1 plastic platinum holder, 4’ pipe-thread, cable length 5m
6） Alarm output: available alarm setting for conductivity or TDS. When the measurement reading exceeds the setting value, a relay will be functioned.
7） Current Output: DC 4-20mA output, optional according to user’s requirement
8） RS-232C interface: available RS-232C access to devices complied with the interface such as computers, printers （DY-301B） to print out measurement data.
9） Real time clock: real time clock function supports the continuously changing printing time to be recorded.
10） Power supply: 220 VAC or 24 VDC, to be confirmed by customers when replace orders
11） Dimensions: frame dimension: 96×96 （mm）, panel dimension: 91×91 （mm）, depth: 95 （mm）
12） Testing standard: Q/TCDP03-2000
Description:
| Display Window | Description | Display Window | Description |
| Date | Year-Month-Day | A | Conductivity reading |
| Time | Hour-Minute | C= | Electrode constant reading |
| Save | Factory setting based | B | TDS |
| Reset at zero | Factory setting based | ppm | Unit of TDS |
| Exceed | Alarm Symbol | µS/cm | Unit of conductivity |
| 4mA | Display “4mA” | Maximum value to alarm | Setting of maximum value to alarm |
| 20mA | Display “20mA” | Minimum vlaue to alarm | Setting of minimum value to alarm |
| Electrode coefficent | Display the electrode coefficent | Temperature compensation | Compensation coefficent |