125-10 ELECTRICALLY CONDUCTIVE 導電油墨

說明：125-10適于絲網印刷的導電油墨和涂料

以及注射器分配。本產品對卡普頓、聚酯薄膜、玻璃和各種

其他表面。與傳統的導電材料不同，這種產品具有很強的抗彎曲和

折痕。125-10的一些應用包括但不限于聚酰亞胺的emi/rfi屏蔽

柔性電路，聚合物厚膜電路，薄膜開關，表面電氣附件

鉭電容器的安裝裝置和陽極涂層。對于某些應用，125-10可以

用作一些標準導電油墨的低成本替代品。

典型固化特性：

稠度光滑膏

填料百分比，固化88

抗皺性佳

體積電阻率（Ω-cm）0.00004

片材電阻率（Ω/sq/mil，大值）0.015

可焊性編號

水解穩定性優異

有效溫度范圍（℃）-55至+200

熱穩定性（℃）良好至+325

理論濕覆蓋率（in2

/gm/mil）29*

比重2.07

建議的處理和固化：125-10已準備好供應使用。進一步變薄可能是

通過添加少量稀釋劑102-03來完成。使用聚碳酸酯時

120-08年。使用前，一定要重新懸浮填料。對于大多數應用程序來說，性能是

當在170°C至180°C下固化幾分鐘時。在多種

通過在50°C至150°C溫度范圍內干燥和固化基板。建議終用戶

通過實驗確定適合個人應用的溫度和時間。

貯存期：25℃下保存6個月；5℃下保存9個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

125-10 ELECTRICALLY CONDUCTIVE 導電油墨

 DESCRIPTION: 125-10 electrically conductive ink and coating suitable for application by screen printing
and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of
other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and
creasing. Some applications for 125-10 include, but are not limited to, EMI/RFI shielding of polyimide
flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface
mounted devices, and anode coatings for tantalum capacitors. For some applications, 125-10 can be
used as a lower cost alternative to some of our standard conductive inks.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Percent Filler, cured 88
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.00004
 Sheet Resistivity (Ω/sq/mil, MAX.) 0.015
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to +325
Theoretical Wet Coverage (in2
/gm/mil) 29 *
 Specific Gravity 2.07
SUGGESTED HANDLING & CURING: 125-10 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of thinner 102-03. When working with polycarbonate thin with
120-08. Prior to using, be certain to re-suspend fillers. Best properties, for most applications, result
when cured for several minutes at 170°C to 180°C. Good properties are obtained on a variety of
substrates by drying and curing at temperatures ranging from 50°C to 150°C. End user is advised to
experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.