Syringe Holder注射器支架SH-1A
注射器支架，防振，SH-1A這是一個通用的0.5英寸。站起來。安裝

基底抑制灌注系統(tǒng)的振動，使其通過顯微鏡檢查臺。多次安裝

選項：該支架可以安裝到表面與M8螺紋孔。它還包括兩個方面，一個是

將保持架放在非磁性表面和強磁性底座上。包括三個0.5英寸。職位，其中

允許您將支架延伸至3英尺高。高到足夠的高度，這個支架可以用來

動物灌注

Syringe Holder注射器支架SH-1A

Syringe Holder注射器支架SH-1A

注射器支架，防振，SH-1A這是一個通用的0.5英寸。站起來。安裝

基底抑制灌注系統(tǒng)的振動，使其通過顯微鏡檢查臺。多次安裝

選項：該支架可以安裝到表面與M8螺紋孔。它還包括兩個方面，一個是

將保持架放在非磁性表面和強磁性底座上。包括三個0.5英寸。職位，其中

允許您將支架延伸至3英尺高。高到足夠的高度，這個支架可以用來

動物灌注，如果與手動流量控制閥相結(jié)合（見下文）。配有SH-10注射器

用于50-60毫升注射器的支架，以及16個用于小容量注射器的適配器。包括八個截止閥和

適合1/16英寸。一、 D.軟管。磁基直徑只有2.50英寸。包括50英尺的塔貢

油管。項目#：SH-1A

Syringe Holder, Anti-Vibration, SH-1A This is a universal 0.5in. stand. The mounting
base inhibits vibrations from perfusion systems to pass through microscope tables. Several mounting
options: the stand can be mounted to surfaces with M8 threaded holes. It also includes both, a stand to
place the holder on non-magnetic surfaces, and a strong magnetic base. Includes three 0.5in. posts, which
allow you to extend the holder up to 3 feet high. Elevated to sufficient height, this stand can be used for
animal perfusion, if combined with manual flow control valves (see below). Comes with SH-10 syringe
holder for 50-60ml syringes, and 16 adapters for smaller volume syringes. Includes eight stop-cocks and
fitting for 1/16 in. I.D. soft tubing. The magnetic base diameter is only 2.50 in. Includes 50 feet of Tygon
tubing. Item#: SH-1A

 注：楊清辰發(fā)布