Voltage

電壓

Voltage rated:  AC220V 50/60HZ

額定電壓： AC220V 50/60HZ

Working Temperature

工作溫度

Max. Temperature: 1400℃( 1 hr)

最高溫度：1400℃ (1小時)

Continuous working temperature: ≤1300℃

持續工作溫度：≤1300℃

Recommended heating Rate: ≤10℃/min

推薦升溫速率：≤10℃/分

Temperature Controller

控溫方式

PID automatic control and auto-tune function.

   模糊PID控制和自整定調節

30 programmable segments for precise thermal processing.

   智能化30段可編程控制

Built-in protection for the over-heated and broken thermocouple. 

超溫和斷偶報警功能

HMI plus PLC Control 10 inch LCD screen Control

人機界面加PLC控制，10寸液晶屏觸控

Length of heating zone

加熱區長度

320mm

Heating Elements

加熱元件

Silicon carbon rod

硅碳棒

Temperature Accuracy

控溫精度

+/- 1℃

Processing tube

爐管

Tube size：Φ80*1200mm(optional）

爐管尺寸：Φ80*1200mm

Two ceramic tube blocks are included for blocking heat radiation generated from tube center, must be fully inserted into the furnace chamber before heating

兩個氧化鋁管堵阻擋管中心產生的熱輻射，必須在加熱前塞進爐膛的正確位置

Liquid storage tank

儲液罐

Size: Height 350mm, diameter ≥150mm

尺寸：高度350mm，直徑≥150mm

Material:stainless steel 304

材質：304不銹鋼材質

The bottom end uses the spring as the buffer when the sample falls

底端采用彈簧作為樣品下落時的緩沖。

Passable atmosphere protection be protected (according to the customer's own process requirements) and the liquid is not filled so that the sample will fall and then gradually out there will have a space buffer to prevent it from spilling into the corundum pipe.

使用過程中可通氣氛保護(根據客戶自身工藝要求）且液體不盛滿這樣樣品落下來反漸出去有一個空間緩沖，防止其濺到剛玉管內。

Dimensions

尺寸

Furnace size:  850*600*1960mm(L*W*H )

爐子尺寸： 850*600*1960mm(長*寬*高 )

Net Weight

凈重

150kg

Vacuum Flange

真空法蘭

With water-cooled flange, the upper flange can manually control clamping the sample and releasing the sample (only reserve the interface of connecting the sample to the wire, do not provide the wire,） can realize the sample leaving the thermal field quickly; The lower flange realizes the connection between the vacuum chamber and the storage tank through the electric plate valve.

    采用水冷法蘭，上端法蘭可手動控制夾住樣品和放開樣品（只預留接樣品掛絲的接口，不提供絲），可實現樣品快速離開熱場；下端法蘭通過電動插板閥實現真空腔體與儲液罐之前的連接。

Sample clamping and release implementation details

樣品夾持以及放開實現細節

The upper end flange end cover is inserted into a small iron core by opening a small hole, the iron core and the flange end cover are extruded and sealed by sealing ring, and the upper end is fixed with the iron core through the split excitation electromagnet (the electric time division excitation electromagnet absorbs the iron core to ensure that it does not fall; The electromagnet withdraws the absorbing force and the sample falls under the action of gravity.

上端法蘭端蓋開一個小孔插入一根小鐵芯，鐵芯跟法蘭端蓋間通過密封圈擠壓密封，上端通過分勵電磁鐵固定住鐵芯（通電時分勵電磁鐵吸合鐵芯保證不下落；斷電時分勵電磁鐵撤出吸合力，樣品在重力作用下下落）

Vacuum Pressure

真空壓力

1pa can be achieved by mechanical pump

   機械泵可達1pa

10^-4 pa can be reached by molecular pump

   分子泵可達10^-4pa

Please click the picture below to order vacuum pump

點擊下列圖片訂購真空部件    

Warranty

質保

One year limited warranty with lifetime support  (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty)

一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內）

Warning

注意事項

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。

Compliance

認證

CE Certified

CE認證

The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost.

可付費進行TUV(UL61010)或CSA認證

Operation instructions

操作指導

Click to download the operating manual

點擊下載說明書