您好, 歡迎來到化工儀器網
奧林巴斯HST-X04掃查器奧林巴斯HST-X04飛行時間衍射（TOFD）手動掃描儀提供了一個高效，低成本，多功能的焊縫檢測解決方案。
應用程序
?手動部署單軸掃描儀，用于板材、管道和曲面
?適用于管道、壓力容器、儲罐和結構件
?可在任何方向操作，無論是在平面上還是在51毫米（2英寸）以下的管道上。OD。
產品簡介
詳細介紹
奧林巴斯HST-X04掃查器
奧林巴斯HST-X04飛行時間衍射(TOFD)手動掃描儀提供了一個高效，低成本，多功能的焊縫檢測解決方案。
應用程序
•手動部署單軸掃描儀，用于板材、管道和曲面
•適用于管道、壓力容器、儲罐和結構件
•可在任何方向操作，無論是在平面上還是在51毫米(2英寸)以下的管道上。OD。
數據采集
•記錄的結果與OmniScan®
•理想的位置相關的a掃描，b掃描，和回聲動態掃描數據收集
•適用于任何有兩個UT通道的系統
掃描工具組件
•掃描儀與150毫米幀
•兩個10mhz(3毫米元件直徑)CentraScan™復合TOFD探頭，比傳統UT探頭的信噪比有所提高
•三套相約楔形與硬質合金穿針和灌溉洞45º,60º,70º操作
•兩個LEMO®-Microdot®傳感器電纜2.5米長
•兩個羅曼蘭®成了bnc適配器
•彈簧加載、摩擦驅動和防水的微型輪式編碼器，用于x軸或y軸數據編碼
•靈活的編碼器定位支架
•額外的250毫米框架更廣泛的探針中心分離
•有小泡沫墊的手提箱
該HST-X04掃描儀套件可以進一步配置，以適應廣泛的奧林巴斯TOFD和脈沖回波探頭和楔形，包括復合產品線。
可選的前置放大器工具包
奧林巴斯HST-X04掃查器
零件號:5682 - kit01
Panametrics 5682前置放大器套件包括:
•5682年前置放大器
•2.5 - m LEMO-LEMO電纜
•電力電纜
•9 V電池
•帶情況
前置放大器操作與標準 9 V電池或插入OmniScan®提供電力電纜。
The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.
Applications
- Manually deployed single-axis scanner for use on plate, pipe, and curved surfaces
- Applicable to pipes, pressure vessels, storage tanks, and structural components
- Operates in any orientation, either on flat surfaces or on pipes up to 51-mm (2 in.) OD.
Data acquisition
- Permanent record of the results with the OmniScan®
- Ideal for position-related A-scan, B-scan, and echo-dynamic scan data collection
- Suitable for any system with 2 UT channels
Scanner Kit Components
- Scanner with 150-mm frame
- Two 10-MHz (3-mm element diameter) CentraScan™ composite TOFD probes offering signal-to-noise ratio improvement over conventional UT probes
- Three sets of ST1 wedges with carbide wear pins and irrigation holes for 45º, 60º, and 70º operation
- Two LEMO®-Microdot® transducer cables 2.5m long
- Two LEMO®-to-BNC adapters
- Spring-loaded, friction-driven, and water proof Mini-Wheel encoder for X-axis or Y-axis data encoding
- Brackets for flexible encoder positioning
- Additional 250-mm frame for wider probe center separation
- Foam-padded carrying case
This HST-X04 Scanner kit can be further configured to fit the broad range of Olympus TOFD and pulse-echo probes and wedges, including the composite product line.
Optional Preamplifier Kit
Part number: 5682-KIT01
The Panametrics 5682 preamplifier kit includes:
- 5682 preamplifier
- 2.5-m LEMO-LEMO cable
- Power cable
- 9?V battery
- Belt case
Preamplifier operates with standard 9?V battery or plugged to OmniScan® with supplied power cable.
Preamplifier specifications
- 30?dB gain
- 50? hours of battery life (continuous discharge)
- Continuous power-level indicator
- 67?dB signal-to-noise ratio
- Weight: 180 g (6.4 oz) with battery
- CE-certified