當前位置：上海會彬儀器有限公司> 供求商機> LP-1200-霍尼韋爾LP-1200手泵Honeywell Hand Pump H-010-0901-000
霍尼韋爾LP-1200手泵Honeywell Hand Pump H-010-0901-000
lp-1200活塞式手泵，采集固定體積的氣體，通過旋轉手柄可選擇在50毫升或100毫升。當氣體采樣完成時，手柄內的流量指示器的一端變成白色。
霍尼韋爾LP-1200手泵Honeywell Hand Pump H-010-0901-000
The LP-1200 is a piston-type hand pump that draws a fixed volume of gas, selectable at either 50 mL or 100 mL by rotating the handle. A tight vacuum seal is formed by a greased plunger gasket. The tapered rubber inlet accommodates a range of tube diameters for different types of tubes. The inlet filter prevents glass pieces and dust from entering the shaft. An end-of-flow indicator in the handle turns white when the gas sampling is complete. A pump stroke counter is rotated to keep track of the number of strokes completed.
霍尼韋爾LP-1200手泵Honeywell Hand Pump H-010-0901-000
Gas detection tubes operate in the following manner: An air sample is drawn through a tube containing a reagent, causing a color change. The concentration is then read from the length of the color stain in the reagent. The advantages of detection tubes over other analytical methods are simplicity of use, rapid response, low cost, and very low maintenance. Because each batch of Honeywell tubes is pre-calibrated, no calibration equipment is necessary. Errors are prevented by directly marking the calibration information on each tube, and accuracy is further ensured by controlling the volume of air sampled. Honeywell tubes are primarily of the narrow bore type and are designed for use with a Honeywell handoperated piston pump.
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
