首頁 >> 供求商機
傳感器模擬器可模擬應變式稱重、測力、壓力、扭矩、加速度等各種傳感器的標準輸出信號，用來校準、檢驗相應的指示儀表，調試各種自動衡器和自動化系統。
不僅如此，美國Rice Lake Transducer Simulator 4還可以測量供橋電壓、環境溫度，并去油可編程功能，是一款高性能、高準確度、多用途的應變傳感模擬器，內部分辨率已達到了100碼。
傳感器模擬器的主要功能是輸出一個標準的應變傳感器信號，用來檢查儀表在各種不同的測試條件下是否都能符合標準的要求。
An all-in-one carrying case provides the portability and convenience required by field technicians. The Transducer Simulator 4 is a fully functional simulator, for replicating a wide range of load cell scenarios.
Designed for high accuracy
Sealed lid with neoprene O-ring
Dustproof and crush tested to 500lb
Four operational modes including vernier adjustment, calibrated adjustment, 0.25mV/V offset and 0.50mV/V offset
Ideal for setpoint or batching simulation
Maximum Voltage:
15V
Bridge Type:
175 ohm star
Linearity:
Less than ±.02% full scale
Temperature Coefficient:
Absolute 5 ppm/°C; Tracking less than 0.5 ppm/°C
Variable Ranges:
Choose any fixed setting ±0.25mV/V or 0.50mV/V through a 10-turn wire-wound
potentiometer with locking clutch
Load Factors:
Simulates 1, 2, 3, 4 or 8 350-ohm load cells or 2, 4, 6, 8 or 16 700-ohm load cells
Calibrated Offset:
+0.25mV/V for use with digitally calibrated meters requiring positive dead load
for calibration
Connectors:
Six-way binding posts, suitable for loose wires or banana plug
Warranty:
One-year limited warranty
訂貨型號
22513 Simulator,Scale-Pro 4 Transducer 0-3mV/V W/Vernier Control From -.50mV/V To +3.5mV/V Simulates 1,2,3,4 or 8 Load Cells NEMA 4X
相關型號
Ranger 1
Ranger 3
Ranger 5
Ranger 7
詳情請聯系我們
3