首頁 >> 供求商機
貨物所在地：廣東深圳市
更新時間：2025-04-18 21:00:08
瀏覽次數：37
在線詢價收藏產品( 聯系我們，請說明是在 化工儀器網 上看到的信息，謝謝！）
張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器。張力儀有機械式和電子式兩種，測量張力的單位用牛頓/厘米表示。張力也可以用相對數值來表示。厘米張力儀就是用相對數值表示張力的一種，是通過張力儀自身重量使絲網下沉的深度的數值(毫米)來計算，張力數值可從指示盤上直接得到，或者從控制盤上間接得到。張力儀有手工操作和機械操作兩種。張力儀是檢驗絲網印版質量的重要的檢測儀器。為保證得到制版要求的張力，在繃網過程中或繃網后都要使用張力儀測量。
德國Honigmann專注于卷材張力檢測和張力控制有超過60年歷史，是大張力測量?jī)x表生產商。旗下產品有鋼索電纜張力計CBM，適用于鋼索，合成電纜，裸露或者絕緣電纜的張力檢測。
For material diameters: 7 Models up to 46 mm Diameter (up to 1-3/4")
Capacities up to 20,000 Kg (44,000lbs or 200kN)
The new Cable Bull Honigmann CBM Cable Tension Meter is a new innovative solution for hand-held portable tension measurement. The unique design allows for measurement of any material diameter between 1 up to 46 mm without custom programming or setup. Suitable for use on all types of materials including wire rope, synthetic cable, bare or insulated wires.
Honigmann CBM Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) as well as running lines. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications. This CBM can also be considered a Rope Tension Meter designed to measure the static tension in wire ropes, cables, guy wires, belts, ...
Applications include guy wires, support cables, tethers, elevator load measuring, tension equalization in elevator ropes, rope sets, service lifts inside wind turbine systems, tensioning, protecting cranes and hoists from overload, tension measurement in stay ropes / cables, suspension ropes and railway catenary ropes, vehicle pull test, for safe loading in material handling, load securing control, tension control of lashing straps, equalize loadings on multi-cable assemblies, and much more.
No calibration or programming required for specific cable diameter or wire construction
Sophisticated roller geometry allows the CBM to measure with an error of less than 1%.
Choice of "front side" or "rear side" position of Lever-Lock mechanism which opens and closes the measuring system
High precision fabrication from Stainless Steel and Aluminum for trouble-free use even in the toughest in-field applications
Connects to lightweight, battery-powered tension indicator for maximum portability and ease of use
Can be used on cable diameters below and above specified range with only small additional inaccuracy
Accuracy | ± 1% Full Scale or better |
Outer Roller Spacing (c:c) | 600 mm or 800mm |
Wrap Angle | 3 Degrees |
Additional Length Effect | 0.12 mm |
Guide Rollers | V-Grooved Aluminum 47/21 mm (OD/Root Diameter) |
Roller Material | Hardened Steel |
Overload Protection | 200% + |
Calibration Certificate | Optional |
訂貨型號
CBM-SR8 for samples diameters 1 up to 8 mm
CBM-SR12 for sample diameters 4 up to 12mm
CBM-SR16 for sample diameters 8 up to 16 mm
CBM-SR22 for sample diameters 14 up to 22 mm
CBM-SR30 for sample diameters 20 up to 30 mm
CBM-SR38 for sample diameters 28 up to 38 mm
CBM-SR46 for sample diameters 36 up to 46 mm
相關型號
DMS485 Handheld Amplifier
(空格分隔,最多3個,單個標簽最多10個字符)
會員.png)
3