首頁 >> 供求商機
Measuring Range in Steel
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters)
(range depends upon probe selected)
5 year warrantyThe new CHECK-LINE TI-25M-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
Checkline TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
Ability to measure through paint and eliminate coatings
Resolution of 0.001 inch (0.01 mm)
Large, backlit LCD display retains last reading
CE-Certified
Special-purpose probes are offered for a variety of applications
Switch-selected units for inches or mm
For underwater surveying, probe cable lengths up to 50 feet are optionally
RS-232 output to transfer individual data values
Includes NIST-Traceable Calibration Certificate
IP 65 Rated
Range | Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) |
Resolution | .001" (0.01 mm) |
Display | 4? - Digit, 0.5" Backlit LCD |
Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
Probe | 5 MHz, 0.25" Diameter (6.35 mm) |
Probe Wearface | PEEK (Polyethlethylketone) |
Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
Output | RS-232, single value when send key is pressed |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) |
Battery Type | Two AA batteries |
Battery Life | 200 hours |
Weight | 7 ounces (196 g) |
Size | 2.5 x 4.5 x 1.25" |
Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
Warranty | Gauge: 5 Years |
訂貨清單
The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
CF12 Coupling Fluid - 12oz
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
T-102-2700 1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer
T-104-9700 1/2" diameter, 3.5 MHz, dual element, Hi-Damped transducer
T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer
N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin)
訂貨型號
TI-25M-MMX Through-Paint Ultrasonic Thickness Gauge Kit with T-102-2700 Probe
TI-25M-MMX-EXT Through-Paint Ultrasonic Thickness Gauge Kit with T-104-9700 Probe
相關型號
TI-25LT
TI-25S
TI-25M
TI-25DL
TI-25DL-MMX
3