化工儀器網
產品簡介
ideal-tek鑷子5AX.SA 自鎖鑷子 電鏡透射鑷子 反作用力鑷子
瑞士*，*的做工受到各大科研單位及*單位的*好評
瑞士*，*的做工受到各大科研單位及*單位的*好評
詳細介紹
只用于動物實驗研究等
| 型號 | 5AX.SA |
| 長度 | 115mm |
| 材質 | 進口不銹鋼 |
General Notes
- low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
- ideal-tek鑷子5AX.SA 自鎖鑷子 電鏡透射鑷子 反作用力鑷子
- contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements
- non-magnetizable
- ideal-tek鑷子5AX.SA 自鎖鑷子 電鏡透射鑷子 反作用力鑷子
- good corrosion resistance to most chemicals, salts and acids
- generally used where corrosion resistance and toughness are primary requirements
- typical applications include tweezers for the electronic industry, watch-makers,
- jewelers and laboratory and medical applications in moderay aggressive chemical environments
Composition
| Component | Wt.% | Component | Wt.% | Component | Wt.% |
|---|---|---|---|---|---|
| C | ≤0.03 | Si | ≤1.0 | Mn | ≤2.0 |
| P | ≤0.045 | S | ≤0.03 | Cr | 17.0-19.0 |
| Mo | 2.5-3.0 | Ni | 12.5-15.0 |
Mechanical properties:
| State | annealed |
| Density | 8.0 g/cm³ |
| hardness HB30 | ≤215 |
| Hardness Rockwell B | 79 |
| Tensile strength, ultimate | 500-700 MPa |
| Tensile strength, yield | 290 |
| 0.2% Yield stress | ≤200 MPa |
| Elongation, break | 40% |
| Modulus of elasticity | 200 GPa |
Thermal properties
| Coef. of lin. therm expansion | 16.0 E-6/°C | 20°C-100°C |
| Coef. of lin. therm expansion | 17.0 E-6/°C | 20°C-300°C |
| Specific heat capacity: | 0.50 J/(g·K) | |
| Thermal conductivity: | 15W/(m·K) | |
| Continuos use temperature: | 350°C | |
| Max service temperature, ait | 925°C |
Electrical properties
| Resistivity | 0.75 E-4 Ohm.cm |