9
組織細胞培養扁管10的特征
- 多功能：培養，孵化，顯微鏡檢查，離心...
- 錐形底設計便于去除沉淀顆粒
- 10 cm2表面活化生長區域，帶給你全新的表面質量感受，透明度*
- 大開口，便于使用移液器和刮刀
- *的透明清晰度 可以直接在倒置顯微鏡下觀察
- 傾斜光滑的上部，可以有效防止折射
- 離心：適用于任何50毫升標準管接頭，可耐受達1'200 gx
- 采用4節段包裝，保證無刮痕運輸
- 帶有激光穿孔的袋子開口，便于打開
用對應TPP管架可以安放8個管，儲存在CO2培養箱中。
首頁 >> 供求商機
Tube, with Snap-On Cap, Polyethylene, 250 µL
Bio-Vial™, Tube, Polypropylene, 4 mL
Stack, Four-Shelf Side Loader試管架
Tube, Thickwall, Polycarbonate, 50 mL
Tube, with Snap-On Cap, Polycarbonate, 50 mL
Tube, Thinwall, Ultra-Clear™, 15.0 mL
Tube, Quick-Seal™, Polyallomer, 1.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 6.0 mL
g-Max Kit, Quick-Seal™, Polyallomer, 3.5 mL
g-Max Kit, Quick-Seal™, Polyallomer, 5.1 mL
Tube, OptiSeal™, Polyallomer, 4.7 mL
Tube, OptiSeal™, Polyallomer, 36.2 mL
Tube, Thickwall, Polyallomer, 3.2 mL
Tube, Quick-Seal™, Polyallomer, 5.1 mL
Tube, OptiSeal™, Polyallomer, 4.9 mL
Tube, Thinwall, Polyallomer, 15.0 mL
Tube, OptiSeal™, Polyallomer, 3.3 mL
Tube, OptiSeal™, Polyallomer, 8.9 mL
Tube, OptiSeal™, Polyallomer, 32.4 mL
Tube, OptiSeal™, Polyallomer, 11.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 27 mL
Tube, Quick-Seal™konical™Polyallomer8mL
Tube, Quick-Seal™,konical™, Polyallomer, 28 mL
Tube, Quick-Seal™,konical™, Polyallomer, 1.5 mL
Tube, Quick-Seal™, Polyallomer, 3.9 mL
Tube, Quick-Seal™,konical™, Polyallomer, 8.5 mL
Tube, Quick-Seal™,konical™, Polyallomer, 4 mL
Tube, Quick-Seal™,konical™, Polyallomer, 1.3 mL
Tube, Quick-Seal™,konical™, Polyallomer, 23 mL
Tube, Quick-Seal™,konical™, Polyallomer, 3 mL
Tube, Thinwall,konical™, Polyallomer, 1.5 mL
Tube, Thinwall,konical™, Polyallomer, 10 mL
Tube, Thinwall,konical™, Polyallomer, 14.5 mL
Tube, Thinwall,konical™, Polyallomer, 25 mL
Tube, Thinwall,konical™, Polyallomer, 30 mL
Tube, Quick-Seal™,konical™, Polyallomer, 3.2 mL
Tube, Thinwall,konical™, Polyallomer, 3 mL
Tube, with Snap-On Cap, Polypropylene, 50 mL
Tube, with Snap-On Cap, Polypropylene, 1.5 mL
g-Max Kit, Quick-Seal™, Polyallomer, 4.2 mL
g-Max Kit, Quick-Seal™, Polyallomer, 2.0 mL
g-Max Kit, Quick-Seal™, Polyallomer, 15 mL
Bottle, Polycarbonate, 10.4 mL
Tube, Thickwall, Polyallomer, 81 mL
Tube, Thickwall, Polyallomer, 32 mL
Tube, Thickwall, Polycarbonate, 4 mL
Tube, Polyallomer, Thickwall, 3.5 mL
Tube, Quick-Seal™, Polyallomer, 4.2 mL
Tube, Thickwall, Polyallomer, 6.5 mL
Tube, Quick-Seal™, Polyallomer, 17 mL
Tube, Thickwall, Polycarbonate, 6.5 mL
Tube, Thickwall, Polycarbonate, 1.0 mL
Tube, Thickwall, Polyallomer, 4 mL
Bottle Assembly, Polycarbonate, 500 mL
Tube, Quick-Seal™, Polyallomer, 3.5 mL
Tube, Thickwall, Polyallomer, 10 mL
Tube, Thickwall, Polycarbonate, 32 mL
Bottle, Assembly, Polycarbonate, 70 mL
Tube, Thickwall, Polycarbonate, 10 mL
Tube, Thickwall, Polycarbonate, 3 mL
Tube, Thickwall, Polyallomer, 3 mL
Tube, Thickwall, Polyallomer, 10.5 mL
Tube, Thickwall, Polycarbonate, 81 mL
Tube, Thickwall, Polycarbonate, 3.5 mL
Bottle, with Cap Assembly, Polycarbonate, 10.4 mL
Bottle Assembly, Polycarbonate, 70 mL
Tube, Thickwall, Polyallomer, 3.5 mL
Tube, Thickwall, Polycarbonate, 10.5 mL
Bottle, with Cap Assembly, Polycarbonate, 26.3 mL
Tube, Quick-Seal™, Polyallomer, 5.9 mL
Bottle Assembly, Polycarbonate, 26.3 mL
Tube, Thinwall, Polyallomer, 2.2 mL
Tube, Thinwall, Ultra-Clear™, 800 µL
Tube, Quick-Seal™, Ultra-Clear™, 6.0 mL
Tube, Thickwall, Polyallomer, 500 µL
Tube, Quick-Seal™, Ultra-Clear™, 27 mL
Tube, Quick-Seal™, Polyallomer, 8 mL
Tube, Quick-Seal™, Polyallomer, 10 mL
瑞士TPP 細胞培養管/組織培養管
組織細胞培養扁管10的特征
用對應TPP管架可以安放8個管，儲存在CO2培養箱中。
20 cm2表面活化生長區域
生長區域長度超過50毫米
刻度標記直至頂部
由"VENT"蓋子十角設計，帶有"Click"，可避免意外滾動，并可重新恢復以前的位置
點擊鎖定位置，"VENT"螺旋蓋處于通氣位置，即使管處于垂直位置，也能保證恒定的氣體交換。
適合15毫升標準管適配器，可旋轉至1'200克
方便的可重新閉合自封袋，激光穿孔
離心
儲存在培養箱中
| Type | Product No. | Growth Surface (cm2) | Version | Volume | max.Centri- fugation (g) | Dimensions (mm) | Material | Qty / Bag | Qty / Case | Case (kg) |
 | 91106 | 20 | VENT | 5 - 8 | 1200 | 16 x 120 | PS | 20 | 800 | 7.8 |
 | 91243 | 10 | conical, Filter | 3 - 10 | 1200 | 30 x 105 | PS | 4 | 216 | 5.2 |
 | 99018 | Rack | 8 tubes | 200 x 88 x 72 | PP | 1 | 28 | 3.0 |