美國進口Digi-Sense RTD溫度探頭

探頭zui大誤差為±1.1°C + 0.12%低于300°F,±0.35%的指數高于300°F。α系數為0.003850ω/ω/°C(DIN IEC 751)。阻力位在冰點(0°C)是100
注意:時間常數是達到新閱讀的63.2%所需的時間。為了確定新閱讀的99%需要多長時間，將時間常數乘以5。
注:溫度范圍僅適用于探頭。如果探頭根據曝光時間、應用程序和處理材料的不同而高于手柄，則會影響手柄材質。ABS處理是額定220°F(104°C);PVC處理是額定200°F(93°C);不銹鋼手柄額定在450°F(232°C);微型連接器是額定392°F(200°C)。

美國進口Digi-Sense RTD溫度探頭

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 omega/omega/°C (DIN IEC 751). Resistance at ice point (0°C) is 100
Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

美國進口Digi-Sense RTD溫度探頭

美國進口Digi-Sense RTD溫度探頭