三级片视频播放,精品三级片在线观看,A级性爱视频,欧美+日韩+国产+无码+小说,亲子伦XX XX熟女,秋霞最新午夜伦伦A片黑狐,韩国理伦片漂亮的保拇,一边吃奶一边做边爱完整版,欧美放荡性护士videos

POWER MATE TECHNOLOGY FDC10 （W） - SERIES
OUTPUT SPECIFICATIONS
Output power 10 Watts, max.
Voltage accuracy Full load and nominal Vin ± 1%
Minimum load 0%
Line regulation LL to HL at Full Load ± 0.2%

POWER MATE TECHNOLOGY FDC10 (W) - SERIES
OUTPUT SPECIFICATIONS
Output power 10 Watts, max.
Voltage accuracy Full load and nominal Vin ± 1%
Minimum load 0%
Line regulation LL to HL at Full Load ± 0.2%
Load regulation No Load to Full Load Single
Dual
± 0.5%
± 1%
Cross regulation(Dual) Asymmetrical load 25% / * FL ± 5%
Ripple and noise 20MHz bandwidth Single
Dual See table
Temperature coefficient ±0.02% / ºC, max.
Transient response recovery time 25% load step change 250µS
Over voltage protection
Zener diode clamp
3.3V output
5V output
12V output
15V output
3.9VDC
6.2VDC
15VDC
18VDC
Over load protection % of FL at nominal input 150%, max.
Short circuit protection Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency See table
Isolation voltage 1600VDC, min.
Isolation resistance 109ohms, min.
Isolation capacitance 300pF, max.
Switching frequency 300KHz, typ.
Approvals and standard IEC60950-1, UL60950-1, EN60950-1
Case material Nickel-coated copper
Base material Non-conductive black plastic
Potting material Epoxy (UL94-V0)
Dimensions 2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
Weight 27g (0.95oz)
MTBF (Note 1) BELLCORE TR-NWT-000332
MIL-HDBK-217F
1.976 x 106 hrs
1.416 x 106 hrs
INPUT SPECIFICATIONS
Input voltage range
FDC10
FDC10-W
12V nominal input
24V nominal input
48V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Input filter Pi type
Input surge voltage
100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load 30mAp-p
Start up time Nominal Vin and
constant resistive load Power up 20mS, typ.
Remote ON/OFF (Option) (Note 6)
(Positive logic)
(Negative logic)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal Vin -0.5mA ~ +1mA
Remote off state input current Nominal Vin 20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
temperature
(Reference derating curve)
Standard
M1 (Note 7)
M2 (W series)
-25ºC ~ +85ºC (with derating)
-40ºC ~ +85ºC (non-derating)
-40ºC ~ +85ºC (with derating)
Maximum case temperature +100ºC
Storage temperature range -55ºC ~ +105ºC
Thermal impedance (Note 8) Nature convection
Nature convection with heat-sink
12ºC/watt
10ºC/watt
Thermal shock MIL-STD-810F
Vibration MIL-STD-810F
Relative humidity 5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 9) EN55022 Class A
ESD EN61000-4-2 Air
Contact
± 8KV
± 6KV Perf. Criteria B
Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A
Fast transient (Note 10) EN61000-4-4 ± 2KV Perf. Criteria B
Surge (Note 10) EN61000-4-5 ± 1KV Perf. Criteria B
Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A

 

POWER MATE TECHNOLOGY FDC10 (W) – SERIES
Model
Number
Input
Range
Output
Voltage
Output Current
Output (4)
Ripple & Noise
Input Current
Eff (4)
(%)
Capacitor(5)
Min. Load max
load Full load No load (3) Full load (2)
FDC10-12S33 9 – 18 VDC 3.3 VDC 0mA 2000mA 50mVp-p 17mA 724mA 80 6800µF
FDC10-12S05 9 – 18 VDC 5 VDC 0mA 2000mA 50mVp-p 21mA 1082mA 81 4700µF
FDC10-12S12 9 – 18 VDC 12 VDC 0mA 830mA 50mVp-p 38mA 1037mA 84 690µF
FDC10-12S15 9 – 18 VDC 15 VDC 0mA 670mA 50mVp-p 36mA 1046mA 84 470µF
FDC10-12D05 9 – 18 VDC ± 5 VDC 0mA ± 1000mA 75mVp-p 39mA 1042mA 84 ± 680µF
FDC10-12D12 9 – 18 VDC ± 12 VDC 0mA ± 416mA 75mVp-p 47mA 1053mA 83 ± 330µF
FDC10-12D15 9 – 18 VDC ± 15 VDC 0mA ± 333mA 75mVp-p 45mA 1041mA 84 ± 110µF
FDC10-24S33 (W) 18 – 36 (9 – 36) VDC 3.3 VDC 0mA 2000(2500mA) 50mVp-p 15(13mA) 362(465mA) 80(78) 6800µF
FDC10-24S05 (W) 18 – 36 (9 – 36) VDC 5 VDC 0mA 2000mA 50mVp-p 22(11mA) 534 (548mA) 82 (80) 4700µF
FDC10-24S12 (W) 18 – 36 (9 – 36) VDC 12 VDC 0mA 830mA 50mVp-p 18(16mA) 519 (519mA) 84 (84) 690µF
FDC10-24S15 (W) 18 – 36 (9 – 36) VDC 15 VDC 0mA 670mA 50mVp-p 36(26mA) 523 (544mA) 84 (81) 470µF
FDC10-24D05 (W) 18 – 36 (9 – 36) VDC ± 5 VDC 0mA ± 1000mA 75mVp-p 28(15mA) 527 (534mA) 83 (82) ± 680µF
FDC10-24D12 (W) 18 – 36 (9 – 36) VDC ± 12 VDC 0mA ± 416mA 75mVp-p 24(15mA) 513 (547mA) 85 (80) ± 330µF
FDC10-24D15 (W) 18 – 36 (9 – 36) VDC ± 15 VDC 0mA ± 333mA 75mVp-p 31(22mA) 520 (548mA) 84 (80) ± 110µF
FDC10-48S33 (W) 36 – 75 (18 – 75) VDC 3.3 VDC 0mA 2000(2500mA) 50mVp-p 11(10mA) 181(239mA) 80(76) 6800µF
FDC10-48S05 (W) 36 – 75 (18 – 75) VDC 5 VDC 0mA 2000mA 50mVp-p 14(9mA) 260 (270mA) 84 (81) 4700µF
FDC10-48S12 (W) 36 – 75 (18 – 75) VDC 12 VDC 0mA 830mA 50mVp-p 14(9mA) 253 (259mA) 86 (84) 690µF
FDC10-48S15 (W) 36 – 75 (18 – 75) VDC 15 VDC 0mA 670mA 50mVp-p 10(11mA) 252 (262mA) 87 (84) 470µF
FDC10-48D05 (W) 36 – 75 (18 – 75) VDC ± 5 VDC 0mA ± 1000mA 75mVp-p 16(12mA) 260 (267mA) 84 (82) ± 680µF
FDC10-48D12 (W) 36 – 75 (18 – 75) VDC ± 12 VDC 0mA ± 416mA 75mVp-p 19(20mA) 254 (281mA) 86 (78) ± 330µF
FDC10-48D15 (W) 36 – 75 (18 – 75) VDC ± 15 VDC 0mA ± 333mA 75mVp-p 16(20mA) 256 (270mA) 85 (81) ± 110µF