適用范圍 Application

LANKAI 高精度FOC直流無刷電機控制器廣泛適用于各式振蕩器，搖床，電動攪拌器，反應釜等高精度恒速設備。

DC motor constant speed controller application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.

產品特點 Features

LANKAI 高精度FOC直流無刷電機控制器LKSC-C系列是高性能、高精度的智能速度控制模塊，其特點如下：

①采用最新FOC 正弦波矢量控制技術和模糊PI控制技術，運行平穩，緩啟緩停，大力矩，輕噪音，發熱低，可長時間穩定運行，帶過流過速堵轉保護電機等功能。

②恒速， 恒扭矩模式可一鍵切換。

③可集成恒溫功能， 可組合加熱、制冷、恒濕、風機、門鎖等功能。

④可設置99段程序，多種液晶顯示規格可選。

⑤標配1500RPM，扭矩0.2-1.2NM的57&86直流無刷電機，也可適配其他支持FOC的無刷電機或伺服電機

⑥ 擴展： 支持 232接口和標準485ModBus-RTU協議，可接電腦上位機軟件控制，PLC等，支持MODBUS協議標準外設。

①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions  of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.

②Can set to operate by constant speed or constant torque mode.

③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.

④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.

⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.

技術參數 Technical Parameter