化工儀器網
技術文章
截止閥國家標準
閱讀：239 發布時間：2012-10-22
| 標準編號 | 標準中文名稱 | 標準英文名稱 |
| DL/T531-1994（2005復審） | 電站高溫高壓截止閥、閘閥技術條件 |
|
| GB/T11689-1989 | 船用法蘭鑄鋼截止閥（四進位） | Marine cast steel flanged stop valves |
| GB/T12235-1989 | 通用閥門法蘭連接鋼制截止閥和升降式止回閥 | General purpose industrial valves—Flanged steel globe valves and lift check valves |
| GB/T12233-1989 | 通用閥門鐵制截止閥與升降式止回閥 | General purpose industrial valves—Casting iron globe valves and lift check valves |
| GB/T1951-1984 | 船用低壓外螺紋青銅截止閥 | Marine low pressure bronze male threaded stop valves |
| GB/T2499-1993 | 船用法蘭鑄鐵雙排截止閥箱 | Marine cast iron flange dual-row stop valves-case |
| GB/T590-1993 | 船用法蘭鑄鐵截止閥 | Marine cast iron flanged stop valves |
| GB/T594-1983 | 船用外螺紋鍛鋼截止閥 | Marine forged steel male thread stop valves |
| GB/T584-1999 | 船用法蘭鑄鋼截止閥 | Marine cast steel flanged stop valves |
| GB/T595-1983 | 船用外螺紋青銅截止閥 | Marine bronze male thread stop valves |
| GB/T587-1993 | 船用法蘭青銅截止閥 | Marine bronze flanged stop valves |
| JB/T7245-1994 | 制冷裝置用截止閥 |
|
| JB/T7747-1995 | 針形截止閥 |
|
| JB/T9081-1999 | 空氣分離設備用低溫截止閥和節流閥技術條件 |
|
| JB/T53165-1999 | 高壓平衡截止閥 產品質量分等 |
|
| JB/T53174-1999 | 截止閥 產品質量分等 |
|
| JB/T53155-1999 | 空氣分離設備用低溫截止閥和節流閥 產品質量分等 |
|
| JB/T8859-2004 | 截止閥 靜壓壽命試驗規程 |
|
| HG/T3215-1986 | 聚三氟氯乙烯塑料襯里截止閥 |
|
| NF E29-350-2003 | 工業用閥.鋼制球閥、球狀截止閥和止回閥 | （Industrial valves - Steel globe and globe stop and check valves.） |
| NF P43-001-2000 | 建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求 | （Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.） |
| NF D36-380-2001 | 燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統 | （Valve proving systems for automatic shut-off valves for gas burners and gas appliances.） |
| NF A84-621-2002 | 氣焊設備.焊接、切割和相關工藝用帶截止閥的速動連接 | （Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.） |
| NF M88-771-1975 | 液化烴容器裝置.手動截止閥.制造.功能.試驗 | （LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.） |
| NF P43-002-1981 | 建筑物水管閥門.水表截止閥.一般技術規范 | （VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.） |
| BS EN 13709-2003 | 工業用閥.鋼制球閥、球狀截止閥和止回閥 | （Industrial valves - Steel globe and globe stop and check valves） |
| BS 1552-1995 | 一類、二類和三類燃氣用手動截止閥規范 | （Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar） |
| BS 7461-1991 | 帶有流量調節器、閉路開關指示、閉合位置指示器開關或氣流量控制的電動自動氣體截止閥規范 | （Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control） |
| BS 1010-2-1973 | 給排水設施用排放旋塞和截止（旋壓式）閥規范.第2部分:排放旋塞和地面上用截止閥 | （Specification for draw-off taps and stopvalves for water services （screw-down pattern） - Draw-off taps and above-ground stopvalves） |
| BS 1873-1975 | 石油、石油化學及有關工業用鋼球形閥、球形截止閥與單向閥（有法蘭及對接焊端）規范 | （Specification for steel globe and globe stop and check valves （flanged and butt-welding ends） for the petroleum, petrochemical and allied industries） |
| BS 3457-1973 | 水與截止閥座墊圈材料規范 | （Specification for materials for water tap and stopvalve seat washers） |
| DIN 4817-1-1981 | 液態氣的截止閥.概念.安全技術要求.檢驗.標志 | （Shut off valves for liquefied gases; definitions, requirement, testing, marking） |
| DIN 86251-1998 | 造船用鑄鐵制帶法蘭的DN15至500的截止閥 | （Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500） |
| DIN 86260-1998 | 造船用炮銅制帶法蘭DN15至500的截止閥 | （Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500） |
| DIN 85003-4-1997 | 造船用管件的交貨技術條件.第4部分:截止閥 | （Technical specifications for valves for shipboard use - Part 4: Stop valves） |
| DIN 85003-6-1997 | 造船用管件的交貨技術條件.第6部分:手動截止閥 | （Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves） |
| DIN 3399-1986 | 低壓截止閥.安全技術要求和檢驗 | （Gas low-pressure cut-off valves; safety requirements, testing） |
| DIN 3160-1974 | 公稱壓力25的冷卻劑循環直通截止閥 | （Through-valves for refrigerant circuits, nominal pressure 25 bar） |
| DIN 3161-1974 | 公稱壓力25的冷卻劑循環角形截止閥 | （Elbow valves for refrigerant circuits; nominal pressure 25 bar） |
| DIN 4056-1992 | 水管.街道地下截止閥門的路蓋.DVGW技術規范 | （Water pipelines; valve boxes for stop valves; DVGW code of practice） |
| DIN EN 1643-2001 | 燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統 | （Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000） |
| DIN 86500-1968 | 船用螺紋連接的截止閥和閘閥等概述 | （Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding） |
| DIN 86254-2000 | 船只及造船技術.超輕型截止閥DN32-DN125（PN10） | （Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10） |
| DIN EN 13709-2003 | 工業用閥.鋼制球閥、球狀截止閥和止回閥 | （Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002） |
| DIN EN 1213-1999 | 建筑閥門.建筑物中飲用水供應用銅合金截止閥.試驗和要求 | （Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999） |
| DIN 86266-2002 | 船舶和航海技術.用手夾緊和法蘭連接的超輕型法蘭的截止閥 | （Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10） |
| GB/T1856-1993 | 船用法蘭鑄鐵單排排出截止閥箱 | Marine flanged cast iron single arrangement exhaust stop box valve |
| GB/T1854-1993 | 船用法蘭鑄鐵單排吸入截止閥箱 | Marine flanged cast iron single arrangement suction stop box valve |
| JIS B8605-2002 | 致冷裝置的截止閥 | （Stop valves for refrigerants） |
| JIS F7379-1996 | 造船.卡套式30K黃銅截止閥 | （Shipbuilding -- Brass 30K stop valves with bite joint（s）） |
| JIS E4103-1988 | 鐵路車輛用截止閥 | （Cut-out cocks for railway rolling stock） |
| JIS E4114-1989 | 鐵路車輛用青銅截止閥 | （Bronze stop valves for railway rolling stock） |
| QB/T3880-1999 | 衛生潔具、暖氣直角式截止閥技術條件 | Technical requirements for sanitariness ware and heating angle valve |
| QB/T3881-1999 | 衛生潔具、暖氣直角式截止閥型式和尺寸 | Shapes and dimensions of sanitariness ware and heating angle valve |
| JB/T10530-2005 | 氧氣用截止閥 |
|