化工儀器網
技術文章
測量應用案例-20201102
閱讀：219 發布時間：2020-11-5
作者： Jiling Zhaoacd，Chen Wangacd，Shixing Wangacd，Yang Zhoub
aFaculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China
bSchool of Textile Science and Engineering, Wuhan Textile University, Wuhan 430200, China
cState Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, China
dNational Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Kunming 650093, China
摘要：A new adsorbent (MOFs-DHAQ) was prepared by functionalizing UiO-66-NH2 with 1,8-dihydroxyanthraquinone to remove Pb(II) from wastewater. The optimum pH, adsorption kinetics and adsorption isotherms were studied. MOFs-DHAQ has a good removal rate for Pb(III) at pH 4. It takes only 30 min to reach maximum adsorption capacity about 213.3 mg/g. The experimental data conforms to the pseudo-secondary kinetics and the Freundlich models. The adsorption process belongs to multilayer chemical adsorption. Desorption and adsorption experiments indicate that the adsorbent can be recycled at least four times. The rising temperature favors the adsorption of Pb(II) on MOFs-DHAQ because the adsorption process is a spontaneous endothermic reaction. The interaction mechanism between Pb(II) and the reactive group is mainly electrostatic interaction and complexation. MOFs-DHAQ has excellent selectivity for removing Pb(II) from wastewater contains a variety of interfering ions. The calculated adsorption capacity (Qex) of Pb(II) for column adsorption was 108.04 mg/g and was consistent with the Thomas model's adsorption capacity(QTh) about 109.63mg/g. Density functional theory calculations show that MOFs-DHAQ combines with Pb(II) through monodentate N atoms and bidentate O groups. MOFs-DHAQ has good application prospect in the removal of lead from wastewater.