PX2088S-600GI壓力傳感器 美國omega

工業智能壓力變送器，長期可靠性
PX2088
新產品! CE
HART協議的準備
20:1翻領
外部零和跨度
0.20%的準確
安全跳線
雙室住房（水密電子室）
分別表征和數字補償
RFI保護
歐米茄的px2088s系列智能壓力變送器保持至少3σ這些堅固的發射機性能可靠規范的*性，再加上選擇的廣泛的選擇，使這些傳感器的艱難的過程應用的特殊價值。該px2088s設計在損壞或故障的傳感器膜片的事件的安全操作。電子艙是由2個密封件從過程分離
三分之一密封隔離現場終端和管道的條目。這種設計確保對住房加壓過程污染。
電子集成ASIC模塊接收數字信號從傳感器，隨著修正系數，并與線性化信號。這是然后轉換為模擬信號傳輸。輸出部還負責HART?通信。
智能功能

The PX2088S smart transducer HART? protocol allows easy access to configuration, test, and setup capabilities. The PX2088S can be configured using a HART? communicator or another HART?-based communications device. Configuration consists of two steps. First, the transmitter operational parameters are set including:
– Zero and span
– Damping
– Engineering units
Second, data can be entered into the transmitter to allow identification and physical description of the transmitter. These data include:
– Tag: 8 alphanumerics
– Descriptor: 16 characters
– Message: 32 characters – Date – Integral meter installation – Remote seal information
In addition to the configurable parameters, the PX2088 software contains information that is not userchangeable. Non-configurable information includes:
– Transmitter type
– Sensor limits
– Minimum span
– Fill fluid
– Isolator material
– Module serial number
– Transmitter software revision level
規格：
Excitation: 10.5 to 36 Vdc unregulated, reverse polarity protected
Supply Effect: <0.01% span/V
Zero Elevation and Suppression: Zero can be suppressed between atmosphere (or 0 psia for absolute ranges) and the upper range limit (URL), provided the span is ≥ the minimum span and the URL does not exceed the units URL. No vacuum calibrations are allowed on the gage pressure models.
Overpressure Limits:
8 and 30 psi Ranges: 120 psi
>30 psi Ranges: 2x URL
Process Temperature Limits:
Silicon Fill: -40 to 121°C (-40 to 250°F)
Inert Fill: -30 to 121°C (-20 to 250°F)
Ambient Temperature Limits:
Standard: -40 to 85°C (-40 to 185°F)
LCD Meter: -20 to 80°C (-4 to 175°F)
Volumetric Displacement: <0.00042 cm3
Accuracy: Includes linearity, hysteresis and repeatability
Smart: ±0.20% of calibrated span
Analog: ±0.25% of calibrated span
Ambient Temperature Effect:
Smart: ±(0.003% URL + 0.003% span)/°F
Analog (Ranges >8 psi): -40 to 0°F ±(0.007% URL + 0.008% span)/°F; -0 to 140°F ±(0.005% URL + 0.005% span)/°F; 140 to 185°F ±(0.007% URL + 0.008% span)/°F
Stability:
Smart: ±0.10% URL for 12 months
Analog: ±0.25% URL for 12 months
Vibration: ±1% URL 4 mm pk/pk 5 to 15 Hz and constant acceleration of 2 g (15 to 150 Hz) and 1 g (150 to 2000 Hz)
Process Connection: ? to 14 FNPT
Wetted Parts: 316 SS (Hasloy? optional)
Electronic Housing: Sealed to NEMA 4X (IP66), low-copper aluminum with polyurethane paint; cover O-ring is Buna-N
Electrical Connections: ? to 14 NPT conduit
Fill Fluid: Silicon oil, standard; inert oil, optional
Weight:
Smart: 1.11 kg (2.44 lb)
Analog: 0.86 kg (1.9 lb)
Fitting Material/Fill Options: (add suffix)
SS/Silicon Oil: Standard
SS/Inert Oil*: "-2B" (additional cost)
Hasloy/Silicon Oil: "-33" (additional cost)
注釋: See Specifications for Fitting Material and Fill Fluid options.Absolute Pressure ranges and options availible, consult Part Number Builder below for model numbers.

產品型號/產品描述
PX2088S-30GI 0-1.5 / 0-30 psi min/max span smart Gage transducer with 4-20 mA output
PX2088S-150GI 0-7.5 / 0-150 psi min/max span smart Gage transducer with 4-20 mA output
PX2088S-4KGI 0-200 / 0-4,000 psi min/max span smart Gage transducer with 4-20 mA output
PX2088-MB Optional 2" Pipe Mounting Bracket

產品型號說明
(1) (2) (3)
PX2088S
I
選項描述
(1) Range (min/max span psi)
選擇
-30 代表 0-1.5/0-30
-150 代表 0-7.5/0-150
代表 0-40/-4K 代表 0-200/0-4000
(2) Pressure Range
選擇
G 代表 Gage Pressure
A 代表 Absolute Pressure
(3) Options
選擇
代表 Nothing (Leave Field Blank)
-M5 代表 LCD Meter scaled 0-100% (adds $150)
注意: 并非所有組合都有效，請參見規格表上有效的產品編號。 

PX2088S-600GI壓力傳感器 美國omega

PX5000L1-1.5KAV壓力傳感器 美國omega