脈沖輸出型                                   

                                      ★ 工作壓力：+12VDC或者+24VDC兩種（客戶                                               定貨前必須選定一種供電電源）。

                                      ★ 信號傳輸距離：小于300米。

                                      ★ 輸出信號：方波信號

                                      ★ 幅值：+12VDC供電幅值大約為10V；+24VDC                                               供電幅值大約為20V。

                                      ★ 安裝：放大器和渦輪流量傳感器連接為M16×1螺                                          紋，渦輪流量傳感器安裝完后，把放大器擰到渦                                          輪流量傳感器上，用手擰到感覺放大器到底后再                                          把鎖緊螺母帶緊。

                                      ★ 接線：脈沖輸出型放大器對外引線為三根，                                               紅線、黃線、 藍線。紅線接正電源，黃線為脈                                         沖輸出，藍色為地線。